Page 58 - comprehensive-catalogue

This is a SEO version of comprehensive-catalogue. Click here to view full version

« Previous Page Table of Contents Next Page »

n Easier to operate n Increased service life n User friendly & easy to service n Increased specifications

Height Adjustable Overrun Device

850 to 3500 kg

58

Your Advantage

1 One-Handed Operation The internally mounted gas spring inside the drawbar profile, supports the net weight of the overrun device. This ensures simple one-handed height adjustments by the operator.

2 Parallel Adjustment Adjustment takes place via the bottom pivot point only, using the parallelogram as an adjusting mechanism. The overrun device on the upper pivot point automatically adjusts to its respective position via the adjusting rod, i.e. it is always horizontal.

3 Height Adjustment Also possible whilst the handbrake is engaged.

4 Park/Transportation setting (90°)

The spacer bars can be set vertically (90 o ) when parked or during transportation if the upper bolt 2 is slackened and dismantled.

Note:

Must be re-tightened before towing!

Tightening torques 161/251 VB-2=M16=250Nm 351VB-2=M20=300Nm

7 Quick Change Couplings The gas spring stays in a fixed position ensuring easy removal of the eye/ball coupling. The new eye or ball coupling can be quickly assembled onto the drawbar and secured using two bolts.

5 Ground Clearing Reverse Lever

The drawbar profile has been set at a right angle to ensure the reverse lever & bottom pivot/height adjustment point do not come into contact with the ground.

6 Optimal Ground Clearing Even in the lowest setting the overrun device can be adjusted 10° below the horizontal drawbar profile. This low construction height of the overrun device ensures an adequate ground clearance of - 10° is achievable, even in the lowest setting.

8 Automatic Hand Re-Tensioner The gas spring actu handbrake lever automatically re-te itself if the handbr been applied incor

9 Ergonomic Hand Design

Ample clearance b the handbrake leve spacer bar ensure injuries are avoided

10 Galvanised Components

Mechanism

The fixed point adjusting mechanism on the bottom drawbar profile is free from play, ensuring that this area (normally subjected to extreme stress) is not susceptible to wear.

Bearing

The drawbar runs inside a robust, cast iron cartridge which is not subjected to wear or play. The casting cartridge can be replaced if required.

Page 58 - comprehensive-catalogue

This is a SEO version of comprehensive-catalogue. Click here to view full version

« Previous Page Table of Contents Next Page »