Technical Specifications

Technical Specifications  

Use the diagram with the table of technical information to determine the required ramp.

Download table of technical information.


1- Measuring / calculation:
The measured loading height is 400mm.
The max. ramp slope C of 30% is applied.
Formula: L = (400/30) x 100 = 1333 mm
2- Having calculated the minimum required length of ramp you can now determine which version of ramp is suitable for your application.
3- Using the wheel base and weight data for your vehicle, determine which weight range is required.
4- Calculate the suitability of the range by taking the load height of your application and deduct the depth of the ramp (D) as shown in the table.
5- If this figure is less than the Maximum Load Height in the table, the ramp is suitable for your application.

© 2018 AL-KO. All Rights Reserved.