Towball Fitting

Towball Fitting  

1 - Only use original parts supplied. The fixings should be tightened to 210 Nm.

2 - When used with an AL-KO AKS stabiliser, the paint should be removed from the ball area with fine emery paper. The ball should then be wiped with white spirit.

3 - For maximum permissible nose load and towing capacity of the tow vehicle, please refer to the vehicles technical specification.

4 - After 600 miles of towing, recheck the torque applied to the tow ball fixings and adjust if necessary. Torque should be checked at every service.

5 - The surface of the tow ball should be kept clean and free from corrosion.

 

 

© 2017 AL-KO. All Rights Reserved.